Download Print this page

R-Go Riser Duo Instructions

Stand instruction steps

Hide thumbs Also See for Riser Duo:

Download this manual

Laptop Stand Instruction Steps

Insert the support in the slot of your desired

Turn both laptop

supports (2). Make sure that both laptop

supports are right angles to the top plate

The top plate rest on the middle plate and

the laptop supports are in the laptop slot. The

laptop stand is now ready to use

height

Lift the top plate of the stand (1)

Lower the top plate and make sure that both

laptop supports go into the laptop slot

Need help?

Do you have a question about the Riser Duo and is the answer not in the manual?

Page 1 Laptop Stand Instruction Steps Insert the support in the slot of your desired Lift the top plate of the stand (1) height Turn both laptop supports (2). Make sure that both laptop Lower the top plate and make sure that both supports are right angles to the top plate laptop supports go into the laptop slot The top plate rest on the middle plate and...
Page 2 Laptop Stand Instruction Steps The bottom side of a stand Flip over the document holder Flip over until parallel with the stand Flip over the whole stand Grab top and middle plate of stand and leave Open the stand en put in desired slot of your bottom on the table height...
Page 3 Tablet Stand Instruction Steps And turn both tablet support at the same time (use both hands). The top plate (3) is right-angled with the Make sure you turn the tablet support until middle plate (4). the hook is in front of the tablet slot Move the tablet hook into the slot (1) and then move the hook around Make sure that the hooks of the tablet sup-...
Page 4 Tablet Stand Instruction Steps Flip over the whole stand Flip over the document holder The bottom side of a stand until parallel with the stand Grab top and middle plate of the stand and Open the stand en put in desired slot of your leave the bottom on the table height Insert the support in the slot of your desired...

Rgoriduobl