R-Go Riser Duo Instruction Manual

R-Go Riser Duo
Tablet stand
Instruction manual for tablet use
To set up the tablet stand, first
follow steps A, B and C on the other
side of the page.
Step A
1
a
90°
b
1 Lift the top plate of the stand until the top plate
(a) is in a 90° angle with the middle plate (b)
Step B
2
2 Turn both tablet supports at the same time (use both
hands)
Step C
3 Place the tablet supports in the tablet slots
Step D
4 Move the tablet supports so that they are clamped
around the middle plate. Your tablet stand is ready for use!