Philips S7970/26 User Manual page 63

Problem
Water is leaking from
the bottom of the
shaver.
SmartClean
Problem
The SmartClean
does not work
when I press the
on/off button.
The shaver is
not entirely
clean after I
clean it withthe
SmartClean.
Possible cause
During cleaning,
water may collect
between the inner
body and the outer
shell of the shaver.
Possible cause
The SmartClean is
not connected to
the wall socket.
The cleaning
cartridge is empty.
The replacement
symbol flashes to
indicate that you
have to replace the
cleaning cartridge.
You have not
placed the shaver
in SmartClean
properly, so there
is no electrical
connection
between
SmartClean and the
shaver.
Solution
This is normal and
not dangerous
because all
electronics are
enclosed in a sealed
power unit inside the
shaver.
Solution
Put the small plug in the
SmartClean and put the
supply unit in the wall
socket.
Place a new cleaning
cartridge in the SmartClean.
Press down the top cap
('click') to ensure a proper
connection between the
shaver and the SmartClean.
62
English