Philips S7970/26 User Manual page 41

1
2
Charging in the SmartClean system (S7970/26 Only)
1
2
1
3
2
2 Put the small plug in the shaver and put the
supply unit in the wall socket.
The display of the shaver indicates that the
shaver is charging.
3 After charging, remove the supply unit from the
wall socket and pull the small plug out of the
shaver.
Note: When the battery is full, the display
switches off automatically after 30 minutes.
1 Put the small plug in the back of the
SmartClean system.
2 Put the supply unit in the wall socket.
3 Press to open the SmartClean system cap, to be
able to place the shaver in the holder ('click').
4 Hold the shaver upside down above the
holder. Make sure the front of the shaver points
towards the SmartClean system holder.
5 Place the shaver in the holder, tilt the shaver
backwards and press down the SmartClean
system cap to connect the shaver ('click').
The battery symbol flashes to indicate that the
appliance is charging. When the battery is fully
40
English