Table of Contents
Advertisement
Available languages
Available languages
1. Adjust the screen angle with both hands.
Using powered serial device
Serial ports of this product support the powered serial devices.
Attention Customers
n
Don't open the jumper switch cover by yourself. The settings must be changed by qualified professionals.
When using powered serial devices, be sure to contact qualified professionals.
Attention Qualified professionals
n
Correctly perform the procedure in accordance below.
After setting change, we recommend that you marking.
To use powered serial devices, perform the procedure below.
1. Turn off the cradle and remove the AC cord.
2. Turn over the cradle.
3. Open the Jumper switch cover.
<Bottom of cradle>
Rotating the screen
Pivot 90 degrees counterclockwides.
Vertically
Tilt from 20 degrees to 80 degrees vertically.
Horizontally
Swivel 270 degrees horizontally.
C A U T I O N
Advertisement
Table of Contents
