Technical Data - Vido WD050210450 Instruction Manual

450W/680W ASPIRATOR BLOWER

TECHNICAL DATA

Model
Voltage
Frequency
Power input
No load speed
Max. air volume
Protection class
Machine weight
Note: For power tool specifications refer to the nameplate on your power tool.
OPERATING INSTRUCTIONS
Note: Before using the power tool, read the instruction manual carefully.
1. Intended use
The machine is intended for vacuuming and blowing of materials that are not hazardous to one's health.
The machine is not suitable for vacuuming and blowing of flammable materials, metal chips and sharp
objects, such as screws or nails.
2. Switching on and off
1) To start the power tool, simply press the on/off switch. Release the on/off switch to stop your power
tool.
2) If you wish to use the power tool continuously, press on/off switch then lock on button, release on/off
switch first and lock on button second (See Fig 1) . Your switch is now locked on for continuous use. To
turn off your power tool just press and release the on/off switch. The switch will return to "off" position
automatically.
3. Regulating the air flow (Only for WD050210680)
The power tool air volume can be changed by turning the speed control to a given number setting from
1 to 7(At the time when the switch trigger is fully pulled). Higher air volume is obtained when the speed
control is turned in the direction of MAX (See Fig 2). And lower air volume is obtained when it is turned
in the direction of MIN.
4. Blowing
1) For dust blowing, attach nozzle to blower outlet. Turn it clockwise until it clicks (See Fig 3).
5. Dust suction
1) For dust suction, fit nozzle onto suction inlet and dust bag onto blower outlet. Turn them clockwise
until it clicks (See Fig 4).
WD050210450
110-120V AC 220-240V AC
50-60Hz
450W
14000/min 14000/min
3000L/min
1.3Kg
110-120V AC
50-60Hz 50-60Hz
450W
6000-16000/min
3
3.0m /min 3500L/min
1.3Kg
8
WD050210680
220-240V AC
50-60Hz
680W 680W
6000-16000/min
3.5m
1.4Kg 1.4Kg
ENG
3
/min