Advertisement
4. Installing the Sound Deadening Foam
4.1 Paper Exit Side (Finisher Side)
Ricoh StreamPunch Pro, Pro EX & MP Installation Manual
Supplied with the StreamPunch, you will find six
strips of sound deadening foam are shipped loose
for field installation. These are not attached at the
factory to avoid compression and/or damage
during shipping.
To install, simply peal the back off to reveal the
adhesive using the following steps as a reference.
Apply the wide strip to the right side as
shown.
Apply one of the two shorter pieces to the
side of the top cover as shown.
5
Advertisement
