Cleaning And Care - Parkside HG04678 Operation And Safety Notes

Fault Possible Cause
Watering Watering program
program is has not been ente-
not being red completely
undertaken
Programs deacti-
(no wate-
vated (Prog OFF )
ring)
Valve was opened
manually previously.
Tap turned off.
Program overlap
(1st watering start
time has priority)
Battery flat
(1 bar flashing)

Cleaning and Care

Attention! Potential damage
to the product. Moisture entering
the product may result in damage.
Ensure no moisture enters the bat-
tery compartment
ning to prevent damaging the
product beyond repair.
during clea-
8
Solution
Read the watering program data
and modify if necessary
Activate program (Prog ON )
Avoid possible program overlaps
Turn tap on.
Enter new watering program
without overlaps
Insert new (alkaline) battery
Only clean the housing with
a slightly damp cloth and
mild washing-up liquid.
Never use petrol, alcohol or
other aggressive cleaning
agents to clean the housing.
GB 23