Putting The Product Into Operation; Setting Current Time And Day Of Week; Programming For Automatic Watering - Parkside HG04678 Operation And Safety Notes

programming. Evaporation and
water consumption is lowest early
in the morning or late in the evening.
Putting the product
into operation
1. Insert batteries to the item as
described in the chapter „In-
serting / replacing batteries".
2. Connect the water timer to
water tap (see Fig. D).
Setting current time
and day of week
1. Press button
2 seconds (see Fig. 1) (not
necessary if you just insert bat-
teries).
The hour display in the
"Time" section will flash
on screen.
2. Set the time in hours with the
rotary control
9 hour) and confirm with the
button
3
for approx.
3
(For example
5
(see Fig. 2).
The minute display in the
"Time" section will flash on
screen.
3. Set the time in minutes with
the rotary control
ample 30 minutes) and con-
firm with the
(see Fig. 3).
The cursor in the "day of
the week" section will flash
on screen.
4. Set the day of the week with
the rotary control
confirm with the
(see Fig. 4).
Remark: In case you input a
wrong data, you can always press
the (ON/OFF) button
to previous step.
Programming for
automatic watering
1. Switch on the product. Press
the SET button
2 seconds (see Fig. 5).
(For ex-
5
button
3
and
5
button
3
to go
7
for approx.
4
GB 17