Advertisement
Instruction manual
• Please use the kettle only with the stand
provided.
• Caution: Insure that the kettle is switched off
before removing it from its stand.
• Only use the appliance with the appropriate
connector.
• WARNING: The filling aperture must not be
opened during use.
•
Surface are liable to get hot during
use.
• THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY. Do not use this
appliance for anything other than its intended
use. Do not use outdoors.
FOR HOUSEHOLD USE ONLY
www.princesshome.eu
PARTS DESCRIPTION
1. Lid
2. Handle
3. Water window with level indicator
4. On/Off switch
5. Water temperature gauge
4
6. Main body
7. Base
8. Filter
BEFORE THE FIRST USE
•
Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
•
Place the device on a flat stable surface and ensure a minimum
of 10 cm. free space around the device. This device is not
suitable for installation in a cabinet or for outside use.
•
Before the first use boil a full kettle of water to clean the kettle and
discard this water.
•
Connect the power cable to the socket. (Note: Make sure the
indicated voltage on the device matches the local voltage before
connecting the device. Voltage 220V-240V 50-60Hz.
USE
•
Fill the jug with the required quantity of water (at least 0.6L and a
maximum of 1.7L).
•
If insufficient water is used, the kettle will switch off, with too much
water it may boil over.
•
To boil water push down the On/Off button. The indicator lamp
will be illuminated.
•
If the appliance is accidentally switched on when empty, the boil-
dry protection will automatically switch it off. Adding cool water
will cool the boil-dry protection mechanism which enables you to
use the kettle as normal.
•
The water temperature gauge constantly shows you the
temperature of the water inside the kettle.
Advertisement
