Installation And Connection; Clock Setting; Microwave Cooking - Princess 119011 Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

INSTALLATION AND CONNECTION

• Remove all packing material and accessories. Examine the oven for
any damage such as dents or a broken door. Do not install if the oven
is damaged.
• Remove any protective film, found on the microwave oven cabinet
surface.
• Do not remove the light brown Mica cover that is attached to the oven
cavity to protect the magnetron.
• Select a level surface that provide enough open space for the intake
and/or outlet vents.
• The minimum installation height is 85cm.
• The rear surface of appliance shall be placed against a wall. Leave a
minimum clearance of 30cm above the oven, a minimum clearance of
20 cm i s required between the oven and any adjacent walls.
• Do not remove the legs from the bottom of the oven.
• The rear surface of appliance shall be placed against a wall. A minimum
clearance of 7.5cm is required between the oven and any adjacent
walls. One side must be open. Leave a minimum clearance of 30cm
above the oven. Do not remove the feet from the bottom of the oven.
• Blocking the intake and/or outlet openings can damage the oven.
• Place the oven as far away from radios and TV as possible. Operation of
microwave oven may cause interference to your radio or TV reception.
• Plug your oven into a standard household outlet. Be sure the voltage
and the frequency is the same as the voltage and the frequency on the
rating label.
• Do not install the oven over a stove or other heat-producing appliance.
If installed near or over a heat source, the oven could be damaged and
the warranty would be void.
OPERATION INSTRUCTIONS

Clock Setting

When the microwave oven is electrified, the screen will display "0:00",
buzzer will ring once.
• Press "Clock" to select clock function, the hour figures will flash.
• Turn to adjust the hour figures, the input time should be within 0--23.
• Press "Clock", the minute figures will flash.
• Turn to adjust the minute figures, the input time should be within 0--59.
• Press "Clock" to finish clock setting. ":" will flash, and the time will light.
Note:
• If the clock is not set, it would not function when powered.
• During the process of clock setting, if you press "Stop/Clear", the oven
will go back to the previous status automatically.

Microwave Cooking

Press "Microwave" the screen will display "P100". Press "Microwave"
repeatedly or turn to choose the power you want, and "P100", "P80",
"P50", "P30" or "P10" will display for each added press. Then press
"Start/+30Sec./Confirm" to confirm, and turn to set cooking time from 0:05
to 95:00. Press "Start/+30Sec./Confirm" again to start cooking.
Example: If you want to use 80% microwave power to cook for 20 minutes,
you can operate the oven as the following steps.
• Press "Microwave" once, the screen displays "P100".
• Press "Microwave" once again or turn" " to choose 80% microwave power.
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

01.119011.09.001

Table of Contents