Advertisement
Instruction manual
PARTS DESCRIPTION
1. Control panel
2. Turntable shaft
3. Turntable ring assembly
4. Turntable Glass tray
5. Observation window
6. Door assembly
7. Safety interlock system
6
7
6
1
5
4
3
2
INSTALLATION AND CONNECTION
• Remove all packing material and accessories. Examine the oven for any
damage such as dents or a broken door. Do not install if the oven is
damaged.
• Remove any protective film, found on the microwave oven cabinet surface.
• Do not remove the light brown Mica cover that is attached to the oven
cavity to protect the magnetron.
• Select a level surface that provide enough open space for the intake and/or
outlet vents.
74Zd
4
Zd
64Zd
64Zd
d`e<9Zd
• The minimum installation height is 85cm.
• The rear surface of appliance shall be placed against a wall. Leave a
minimum clearance of 30cm above the oven, a minimum clearance of 20 cm
is required between the oven and any adjacent walls.
• Do not remove the legs from the bottom of the oven.
• The rear surface of appliance shall be placed against a wall. A minimum
clearance of 7.5cm is required between the oven and any adjacent walls.
One side must be open. Leave a minimum clearance of 30cm above the
Advertisement
