Advertisement
Available languages
Available languages
1. Components & Controls
Creader VIII features same appearance as Creader VII+. Here we
only take Creader VII+ for example.
1
2
3
4
No.
Power indicator
1
It will light up while the tool is energized.
Communication indicator
2
It will flash when the tool is communicating with ECU.
LCD
3
Indicates test results.
Data I/O port
4
To connect on PC to upload data or upgrade the tool.
Memory card slot
5
Insert the memory card into it to read or write the data/
file.
Descriptions
/
Move cursor up or down for selection.
/
Move cursor left or right for selection; Or turn page up or
down when more than one page is displayed.
7
6
Confirms a selection (or action) from a menu list.
6
5
Exit the current program or return to the previous screen;
or confirm to display the selected data stream in Data
Stream.
To retrieve the DTCs in the database.
OBD-15 connector
7
To connect on vehicle's DLC(Data Link Connector) via
diagnostic cable.
2. Register & Update
Follow the steps described as below to proceed registration and
update:
1. Go to http://www.x431.com/CReader VII+&VIII and download
the update tool to the computer. Decompress and install it on
your computer (compatible with Windows XP, 7, 8 & 10).
Note: Creader VIII shares the same URL with Creader VII+.
1
Advertisement
Need help?
Do you have a question about the Creader V II+ and is the answer not in the manual?
Questions and answers
I accidentally formatted the card and now y can't find my registration number on diagnostics CreaderVII+ 966390067746.Can you help me?
To retrieve the registration number for the Launch Creader VII+ after formatting the TF card, follow these steps:
1. Turn on the Creader VII+.
2. Navigate to the main menu.
3. Select "Tool Information" and press "OK".
4. The registration code will be displayed on the screen.
Use this registration code to complete the registration process again if needed.
This answer is automatically generated