Launch Creader VII+ Manual To Register & Upgrade

Follow the steps described as below to proceed
registration and update:
1. Go to http://mycar.x431.com/pad/landingPageIndexCrv.
action and click the"Updating Tool Download" icon. See
Figure 1-a or Figure 1-b.
Figure 1-a (For Creader VII+)
Figure 1-b (For Creader VIII)
2. Download and install the Creader VII+ / Creader VIII
update tool and launch the program when installed, a
screen similar to Figure 2 will appear:
3. In Figure 2, type in the serial number, which is located on
the back of the Creader VII+ / Creader VIII.
4. After the serial number is entered, click "Update" to jump
to the registration page. Enter the following information
and click "Submit" (refer to Figure 3).
Guide to Register & Upgrade
Figure 2
(If you need the Register Code, please refer to Steps 5~8.)
(If you have the Register Code, directly proceed to step 9.)
5. The register code can be found in your Creader VII+ /
Creader VIII. Connect one end of the supplied USB cord
to Creader VII+ / Creader VIII, and the other end to the
computer.
6. After Creader VII+ / Creader VIII has powered up and
entered the main menu screen, move the highlight bar on
the "Help" icon (See Figure 4) and press the
7. Select "Tool Information" (refer to Figure 5) and press the
button to enter.
8. The register code shown in Figure 6 is the register code
for inputting in step 4.
LAUNCH
Figure 3
Figure 4
Figure 5
button.