Siemens QAW740 Installation Instructions Manual page 22

4. After having made all settings, leave the
expert level by pressing the Comfort
button.
Settings to be made on the expert level:
Programming mode
For setting the device address from a tool.
Display
−
Software version
Display
−
Device address of partner controller P
This shows the device address of the controller in the same
geographical zone (A). The room unit is the remote operation facility
for this controller.
Display range
−
Actual value threshold of the room temperature
Using the threshold function, bus traffic of the room temperature can
be limited. In that case, a measured value is delivered only when the
threshold value is exceeded.
Default value
−
Range
−
8
74 319 0328 0 a - B1633
Prog.
Software version
1...254
40 mK
20...300 mK
Installation Instructions