Error Messages - LG WT19 SBP Series Owner's Manual

Error Messages

Symptoms
38
Reason
The door is not closed
properly.
Door lock switch error.
Special Drain Feature.
Water supply taps are not
fully open.
Water line hoses are kinked,
pinched, or crushed.
Water inlet filters are
clogged.
Water supply pressure to tap
or house is too low.
Water supply connected with
leaklimiting hoses.
Foreign objects, such as
coins, pins, clips, etc., caught
between the wash plate and
the inner basket.
Drain hose is kinked,
pinched, or clogged.
Drain discharge is more
than 1.2 m above bottom of
washing machine.
Solution
• Close the door completely. If the error code is
not released, call for service.
• Check nothing is caught under the door,
including shipping materials or lothing.
• Close the door completely. If the error code is
not released, call for service.
• If the washing machine is paused during a cycle
for a few minutes, the cycle will be cancelled
and any water remaining in the drum will be
drained.
• Fully open tap.
• Straighten the hose(s).
• Clean the inlet filters.
• Contact a plumber to have the water lines
repaired.
• Do not use leak limiting hoses.
• Turn off the washing machine and then press
the ENCENDIDO/APAGADO (POWER) button.
Press the Centrifugado (Spin) button without
selecting a cycle to drain and spin the load.
When the spin is complete, remove the clothes
and then find and remove any objects caught in
the wash plate.
• Straighten the hose(s).
• Adjust or repair drain. Maximum drain height is
1.2 m.
EN