Installation - Tripp Lite U442-DOCK16-B Owner's Manual

Installation

1. Pull out the self-storing cable beneath the docking station and
connect it to a laptop, tablet or any other USB-C compatible
device.
2. Connect an HDMI-compliant display to the docking station
with a user-supplied HDMI cable, such as Tripp Lite's P569-
Series (sold separately).
3. Repeat Step 2 for the Mini DisplayPort and VGA ports
compatible user-supplied cables.
Note: The following Table depicts the maximum resolution achieved on
each video port based on the connected displays.
• Mac sources allow only one monitor to be extended while the other
one or two displays will always be mirrored
• Windows sources allow you to extend across all three screens.
• Only one 4K display @ 30 Hz can be extended in an application.
If both HDMI and Mini DisplayPort are being extended, the HDMI
resolution will automatically drop to 1080p.
Windows Source
(4K @ 30 Hz)
1
(4K @ 30 Hz)
1
(4K @ 30 Hz)
1
(4K @ 30 Hz)
No image
* = Port not in use
VGA
(1080p @ 60 Hz)
2
(1080p @ 60 Hz)
2
(1080p @ 60 Hz)
*
1
(1080p @ 60 Hz)
5
HDMI
(4K @ 30 Hz) (4K @ 30 Hz)
3
(4K @ 30 Hz)
*
(4K @ 30 Hz)
2
(4K @ 30 Hz) (4K @ 30 Hz)
2
(4K @ 30 Hz) (4K @ 30 Hz)
Mini DP
*
3
3
3