Table of Contents
Advertisement
Software setup
4 – Insert SD card in the Pi
›
After the flash process insert the SD
card in the Raspberry Pi and turn it on.
Wait about 2 minutes.
5 – Connect to moode.local/
›
Connect your host machine or mobile
phone to the "Moode" network and then
type http://moode.local/ into your web
browser to access the configuration GUI.
The password is "moodeaudio".
6 – Configuration menu
›
Press on the "m" local menu at the top right
corner menu, and then go to "configure".
2019-12-01
Copyright © Infineon Technologies AG 2020. All rights reserved.
Figure 7. Assembly procedure of the Raspberry Pi + HAT
Figure 9. Press on the "m" logo and then go to "configuration"
Figure 8. Connecting to moode.local
6
Advertisement
Table of Contents
