Hardware setup
Attach
boards
Secure
assembly
Hold
2019-12-01
›
Attach the MERUS
Raspberry Pi using 2.5M screws and
2.5M 4mm length spacers.
›
Secure both boards assembly with 2.5M
spacers or nuts.
›
Do not connect the power supply. Continue with the software setup.
Copyright © Infineon Technologies AG 2020. All rights reserved.
TM
HAT to the
Figure 4. Assembly procedure of the Raspberry Pi + piHAT
Figure 5. Completed assembly of the Raspberry Pi +
piHAT.
4