Pip Operation With A Vcr - No Cable Box - Panasonic CT-27SX32 Operating Instructions Manual

2 Tuner PIP Operation with a VCR - NO Cable Box
This television includes a two tuner Picture In Picture (PIP) feature. This allows viewing two (2) live broadcasts at the same
time with or without an external video source (VCR).
Connect your television to a VCR, as shown.
ANT
Note: The Remote Control must be programmed with the supplied codes to operate the VCR.
Procedure
Press the PIP button on the Remote Control to display the PIP frame on screen.
Note: The audio is from the Main Picture only.
To view an external video source in the PIP frame:
1. Press the TV/VIDEO button on the Remote Control to select the same video input to which your VCR is connected.
2. Verify that the VCR is on.
3. Choose channels for the Main Picture by pressing the TV button on the Remote Control and using the numeric keypad or CH
up/down button.
4. Choose channels for the PIP frame by pressing the VCR button on the Remote Control and using the VCR/DBS CH up/down
buttons.
Note: The SWAP button switches the PIP and Main Picture source. Press the RECALL button for on screen PIP and Main
Picture source status.
CONNECTIONS ON BACK OF TV
INPUT 1
AUDIO
COMPONENT
R L
VIDEO INPUT
P P Y/VIDEO
R B
INPUT 2
S-VIDEO
R L
VIDEO
CABLES NOT SUPPLIED
2 T P
UNER ICTURE
VIDEO OUT
AUDIO OUT
L
TO AUDIO
ANT IN
AMP
R
I P (PIP) O
N ICTURE
VCR
L
R
Incoming
Cable
PERATION
9 ?