Pip Operation With A Vcr - No Cable Box - Panasonic CT-27D11 Operating Instructions Manual

0373 -1E.fm Page 10 Monday, February 26, 2001 3:47 PM
1 T PIP O
UNER PERATION WITH A
1 Tuner PIP Operation with a VCR - No Cable Box
TO AUDIO
AMP
L
ANT IN
R
10
VCR - N
Note: Refer to the FEATURE COMPARISON CHART on page 3 for your television PIP capability.
This television includes a Picture In Picture (PIP) feature. A second video source
(VCR) is required to provide a second picture.
Connect your television to a VCR, as shown:
CONNECTIONS ON BACK OF TV
COMPONENT
R AUDIO
VIDEO INPUT
P
R
INPUT 1
S-VIDEO
R AUDIO
INPUT 2
Note: The Remote Control must be programmed with the supplied codes to operate the VCR. See
Programming the Remote Control in the Remote Control Quick Reference Guide.
Procedure
Turn the VCR OFF and tune the TV to channel 3.
Press the PIP button on the Remote Control to display the PIP frame on screen.
Note: The PIP picture is the same as the Main picture, initially.
r
Press the TV/VIDEO button on the Remote Control to select the VIDEO PIP source.
r
Press the VCR button on the Remote Control and turn ON the VCR.
r
Press the TV/VCR button on the Remote Control.
r
Choose channels for PIP frame by pressing VCR CHANNEL up/down buttons on the
Remote Control.
r
Choose channels for the Main Picture by pressing the TV button on the Remote Control
and using the numeric keypad or CH up/down buttons.
The SWAP button switches the PIP and Main
Picture source. Press the RECALL button for on
screen PIP and Main Picture source status.
C B
O ABLE OX
L
P Y/VIDEO
B
VIDEO
L
CABLES NOT SUPPLIED
SWAP Button
VCR
VIDEO OUT
ANT IN
L
AUDIO OUT
R
ANT OUT
Incoming
Cable