Filter Reset - Philips AC3858 User Manual

1
Switch off the air purifier and unplug from the power socket�
2
2
Pull the back cover and remove it from the appliance�
3
Pull the filter from the appliance�
4
Remove all packaging materials of the new filter�
5
Put the new filter into the appliance�
6
Reattach the back cover�
7
Put the plug of the air purifier in the power socket�
8
Touch the button to switch on the appliance�
9
Touch and hold the filter status check/reset button
for 3 seconds to reset the filter lifetime counter�
10
Wash your hands thoroughly after replacing the
filter�
Note: Do not smell the filter as it has collected
pollutants from the air�

Filter reset

You can replace the filter even before filter replacement alert (
the screen� After replacing a filter, you need to reset the filter lifetime counter
manually�
1
Touch the power
the appliance and unplug from power socket�
2
Put the power plug in the power socket�
3
Within 15 seconds after power on, touch and hold
and button for 3 seconds to reset the filter
lifetime counter.
3 4
button for 3 seconds to turn off
5 6
Filter has been replaced.
) displays on
PM2.5
IAI Gas
+
EN
35