Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Freedom Innovations iQ Vacuum
Summary of Contents for Freedom Innovations iQ Vacuum
- Page 1 Freedom Vacuum ™ Instructions...
-
Page 2: Table Of Contents
Freedom iQ Vacuum App (iQ Vac App) for Users Interactions Features and Options Water Mode Stop on Leak Vent on Power Off Downloading and Launching App Connecting and Pairing to iQ Vacuum via iQ Vac App Disconnecting Warranty Technical Support Electromagnetic Precautions CE Conformity Authorized Representative... -
Page 3: Device Components
3,2 mm 90 Degree Elbow Barb OTS-69-00010-00 Pylon Bumper, Foam Tape OTS-32-00008-00 AC/DC Wall Mount Adapter OTS-62-00006-00 iQ Vacuum Device IFU IFU-03-004 Terms/Symbols Used In This Guide Bluetooth Type BF applied part Battery WEEE Directive on waste electrical and electronic... -
Page 4: Warnings/Safety Precautions
• Failure to comply with safety precautions can result in iQ Vacuum Freedom iQ Vacuum is indicated for use as a component in a prosthetic malfunctioning and risk of injury to the user. Please read the leg for individuals with lower limb deficiency including: instruction manual thoroughly before using. -
Page 5: Setup
The amount of height In order to maintain the IP67 rating, the external case of the iQ Vacuum required between the socket and the foot depends upon the top profile should never be open except for authorized service. -
Page 6: Basic Operations
To manually control iQ Vacuum, use the button and LED indicator on Release the button and a flashing red light will indicate that the the top of iQ Vacuum. The button is used as both a power switch and firmware is resetting. If you decide not to reset, simply continue for limited interaction with iQ Vacuum when a mobile device is not pressing the button until the amber light turns off. -
Page 7: Freedom Iq Vacuum App For Prosthetists (Iq Vac App)
You may want to increase the rate if you feel the device is going into to alter the standard target vacuum levels. In the Freedom iQ Vacuum medium or high activity mode too early or you may want to decrease select Controls>Settings>Step Detection Setup. -
Page 8: Outcomes And Engineering Reports
Once out of the water, Controls>Device>Engineering Report. The Engineering Report offers resume use of the iQ Vacuum by powering it on once again and more detailed session data for the last 100 sessions of use. -
Page 9: Stop On Leak
Settings menu (Controls>Settings>Misc). The Vent on Power Off electromagnetic compatibility (EMC). Specifically it needs to be feature enables the user to set a time in seconds that the iQ Vacuum installed and put into service according to the EMC information... -
Page 10: Ce Conformity
| Instructions for Use CE Conformity iQ Vacuum Product Detail The Freedom iQ Vacuum is tested and certified to comply with the MDD 93/42/EEC (EN 55011 Class B and IEC60601-1 and IEC60601-1-3), STSI EN 300-328 under R&TTE Directive 1999/5/EC and, ISO10328. The device complies with Part 15 of the FCC Rules and carries the CE mark. - Page 11 Tel.: +31(0)53-20 30 300 Fax: +31(0)53-20 30 305 www.freedom-innovations.eu info@freedom-innovations.eu © 2019 Freedom Innovations Europe B.V. All rights reserved. iQ Vacuum is a trademark of Freedom Innovations, LLC. ™ IFU-03-004 Rev. A - iQ Vacuum Instructions for Use, English EU...
Need help?
Do you have a question about the iQ Vacuum and is the answer not in the manual?
Questions and answers