Getting Started - VTech Colour Notebook User Manual

Note:
Please keep user's manual as it contains important information.
Unlock the packing lockers:

GETTING STARTED

POWER SOURCE
The Colour Notebook operates on 3 AA sized batteries (AM-3/LR6) or a VTech
7.5V 400mA or 9V 300mA adaptor (sold separately). The AA sized batteries included
in the unit are for demo purposes only and are not long-life batteries.
Please remember to remove all batteries from the battery slot if you are using a
power supply adaptor.
BATTERY INSTALLATION
NOTE: For best performance, replace with new, alkaline batteries.
1 Make sure the unit is turned OFF.
2 Locate the battery cover on the bottom of the unit and open it.
3 Insert 3 AA sized batteries as illustrated.
4 Close the battery cover.
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-zinc) or rechargeable
(Ni-Cd, Ni-MH), or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if removable).
• Rechargeable batteries are only to be charged under adult supervision.
3
Rotate the packing locker 90 degrees anti-clockwise
Pull out the packing locker
®