Huawei S2750 Series Hardware Description page 26

S2750 Series Ethernet Switches
Hardware Description
Console Port
The console port of a switch can connect to an operation terminal for onsite configuration. The
port must use
switch through the console port.
Table 2-9 Attributes of a console port
Attribute
Connector type
Standards
compliance
Working mode
Baud rate
JTAG port
Figure 2-8
check and diagnose equipment faults.
Figure 2-8 JTAG port
Issue 04 (2014-03-20)
3.5 Console Cable. To configure a switch after the first power-on, log in to the
Table 2-9
Item
RJ45
RS-232
Full-duplex universal asynchronous receiver/transmitter (UART)
9600 bit/s to 115200 bit/s
The default value is 9600 bit/s.
shows the JTAG port. The JTAG port is an internal port of the switch and is used to
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
lists attributes of a console port.
2 Chassis
20