Advertisement
Available languages
Available languages
ACE AFM-5
Breathalyzer
Quick Start Guide
Label of individual components:
Mouthpiece
Mouthpiece slot
Battery compartment cover
1.
slot.
2.
Play Store (Android), open it and select language and measure-
ment unit (per mill = EU, % BAC = USA, mg/L = UK).
3.
switched on on your smartphone.
4.
Blue, Green and Red LEDs appear.
5.
NOTE: In case of the first pairing process, a PIN Code request
will be displayed. Type in "000000" as PIN Code.
6.
the device and the screen on your smartphone will show "START
TEST".
7.
button on the ACE Instruments AFM-5).
8.
9.
Air outlet (always
When warming up gage reaches 95, take a deep breath and get
keep this part
ready for blowing.
unblocked)
10.
the mouthpiece until the gage reaches 100 (blow steadily and as
you would whistle without a break).
11.
the "Analyzing data" will be shown on the app.
12.
tration will be displayed on the app e.g. in per mill (3 digits, 2
decimals/per mill = setting for EU customers).
13.
Power button on the ACE Instruments AFM-5) to test again.
Please note:
Wait at least 15 minutes after finishing your last drink.
Power button
From hygiene reasons and for accurate measurement
Check the batteries and put a mouthpiece into the moutphiece
Download the "Alcofind" app from App store (iOS) or Google
Press the OK button in the app and check if Bluetooth is
Press and hold the Power button on the breathalyzer until the
The pairing process starts and the Blue LED will blink.
If pairing is successful, Green and Red LEDs will appear on
Tap "START TEST" on your smartphone (or press Power
Choose a user (in the app).
The circular bar on the app indicates the progress of warm-up.
When "Start blowing" is displayed, blow for 5 seconds into
If a sufficient breath sample is taken correctly,
After a few seconds the estimated blood alcohol concen-
Tap either "Retest" or "BAC level" on the app (or press the
results always use a new mouthpiece for each test.
Advertisement
