Exchanging Patches 4 Usb; Initializing A Patch 4 Auto Off; F.reset (Factory Reset) - Boss VE-500 Parameter Manual

MENU
USB
Here you can make USB-related settings for when the VE-500 is
connected to your computer via USB.
VE-500
MIX
ROUTING
USB
IN
USB
PRE FX
IN LEVEL
MIC
IN
INPUT
EQ
EFFECTS
Parameter Value Explanation
Adjusts the level of the audio input from the
IN LEVEL 0–200
computer.
Adjusts the level of the audio output to the
OUT LEVEL
0–200
computer.
If this is "ON, " the input sound from the computer
is mixed with the sound of the VE-500 and
LOOP BACK
OFF, ON
returned to the computer.
* If this is "ON, " ROUTING cannot be used.
Switches whether the sound of the VE-500 is output to the
OUTPUT jacks.
* This setting cannot be saved. It will be "ON" when the unit is
powered-on.
Turn this off if you're "thru-ing" the audio data
within your computer.
DIRECT MON
OFF
* If you don't set your computer to "thru" the
The sound of the VE-500 is output directly. Turn
this on if you're using the VE-500 by itself without
ON
connecting a computer (if this is off, only the
sound that's input to USB will be output).
Specifies where the input sound from the computer is
connected.
ROUTING
MIX Input to the VE-500's internal mixer.
Connected to the Input EQ, and then input to the
PRE FX
internal effect.
30
MIXER
USB BUS
LOOP BACK
USB
OUT LEVEL
DIRECT MON
MAIN BUS
audio, you won't hear sound.
AUTO OFF
If you set the auto-off function to "On, " the power will turn off
automatically when 10 hours have passed since you last played or
operated the unit. The display will show a message approximately 15
minutes before the power turns off.
* With the factory settings, this is turned "on. " If you don't need
the power to turn off automatically, turn this "off. "
* If the power was turned off by the Auto Off function,
disconnect and then reconnect the AC adaptor to turn the
power on again.
USB
Parameter Value
OUT
OFF
AUTO OFF
ON

F.RESET (FACTORY RESET)

XLR
OUT
Restoring the VE-500's settings to their original factory default
XLR
settings is referred to as "Factory Reset. "
OUT
Not only can you return all of the settings to the values in effect when
the VE-500 was shipped from the factory, you can also specify the
items to be reset.
* When you execute "Factory Reset, " the settings you made will
be lost. Save the data you need to your computer using the
dedicated software.
Parameter Value
[1] knob
SYSTEM
FROM
U01–99
[3] knob
SYSTEM
TO
U01–99
Explanation
The power will not turn off automatically.
The power will automatically turn off when
10 hours have passed since you last played or
operated the VE-500.
Explanation
System parameter settings
Settings for patch numbers U01–U99
System parameter settings
Settings for patch numbers U01–U99