Changing The Effect Connections; Changing The Ctl & Assign Settings - Boss VE-500 Parameter Manual

Basic Operation
Basic Procedure for Effect Editing
1
Recall the patch that you want to edit.
5 Switch to memory mode.
5 Use the [?] [=] switches to select a patch.
Patch down Patch up
You can turn knob [1] to select patches consecutively.
2
Press the [EFFECT EDIT] button.
The effect select screen appears.
3
Use knob [1] to select the effect that you want to
edit.
You can use the [EFFECT EDIT] ([ON/OFF]) button or knob [2] to
turn on/off the effect where the cursor is located (highlighted).
An effect that is on is shown by an icon. An effect that is off is
shown as "OFF. "
MEMO
For FX1-4, and HRM (VOC), you can use knob [3] to choose the
effect type.
4
Press the [ENTER] button to access the edit screen.
MEMO
In the edit screen, press the [ON/OFF] button to turn the effect on/
off. This lets you hear what the effect does. In screens where page
tabs are displayed, use the [< PAGE] [PAGE >] buttons to move
between editing screen pages.
5
Use knobs [1]–[3] to specify the value of each
parameter shown in the screen.
6
Press the [EXIT] button a number of times to return
to the play screen.

Changing the Effect Connections

1
In the effect select screen, choose "MST."
2
Use "FX STRUCTURE" to change the order in which
FX1–4 are connected.
3
Use "REVERB STRUCTURE" to change the order in
which REV1 and REV2 are connected.
The effect connection changes.
Changing the CTL & ASSIGN Settings
You can operate a variety of parameters by making CTL and ASSIGN
settings for each patch.
1
In the effect select screen, use knob [1] to select
"CTL," and then press the [ENTER] button.
The CTL & ASSIGN screen appears.
2
Use knobs [1]–[3] to select the controller that you
want to edit.
An icon indicates controllers that are turned on. Controllers that
are off are indicated by "OFF. "
3
Press the [ENTER] button to move to the edit
screen.
In screens where page tabs are displayed, use the [< PAGE]
[PAGE >] buttons to switch between edit screen pages.
4
Use knobs [1]–[3] to edit the parameter values in
the screen.
5
Press the [EXIT] button a number of times to return
to the play screen.
3