Tape Operation (Search System) - Panasonic PV-D4743-U Operating Instructions Manual

Tape Operation
Search System
For each recording, an invisible index mark is placed on the tape. A program index and
information are also included for timer recordings. These marks are used to access or
scan recordings.
Index Search
1
INDEX SEARCH
ENTER INDEX NUMBER :1
USING 1- 9 KEYS
FORWARD SEARCH :FF
REVERSE SEARCH :REW
NEXT :SEARCH
EXIT :STOP
2
INDEX SEARCH
FORWARD SEARCH : FF
REVERSE SEARCH : REW
To Calculate Index Number
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
1 2 3
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
1 2 3
NOTE: indicates start points of each recording.
Note
• If Index Search is started very close to an
index mark, that index mark may not be
counted in the search.
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
30
Press SEARCH*
to display SEARCH
in Stop or Play
mode, and then
press NUMBER
keys
to select recording
number.
• To calculate
number, see below.
Press FF/SLOW+
or REW/SLOW- on
the remote to start
search.
Play begins at
search end.
To search forward
or back 1 index,
press FF/SLOW+ or
REW/SLOW- on the
remote while
screen left is
displayed (10 sec.).
• To cancel, press
PLAY or STOP.
4 5 6 7
4 5 6 7
Program End Search
Locates end point of recording for continuity.
1 Press SEARCH twice
to display SEARCH in Stop or Play
mode.
2
PROGRAM END SEARCH
SEARCH START : FF
EXIT :SEARCH
Examples of Program End Search.
Fig. 1
Program 1
the current tape position
Press SEARCH button
FF
Fig. 2
Program 1 BLANK
the current tape position
Press SEARCH button
Fig. 3
the current tape position
Press SEARCH button
Program 1 BLANK
FF
End Point
Upon locating end point,
➛ ➛ ➛ ➛ ➛ search continues 7 sec. past end point,
➛ ➛ ➛ ➛ ➛ tape rewinds to 10 sec. before end point,
➛ ➛ ➛ ➛ ➛ tape plays to end point and stops.
Note
• If Program End Search is started very close to
an index mark, that mark may be skipped over.
Press FF/SLOW+
on the remote to
start PROGRAM
END SEARCH.
• To cancel, press
PLAY or STOP.
Program 2 or BLANK
End Point
Program 2 BLANK
End Point
FF
Program 2
If search exceeds
a few seconds in
BLANK area.