Honeywell AIRVISOR 2 Instructions Manual page 8

Minimum Supply Pressures at the inlet of compressed air supply hose:
Supply Hose length
Hose bore (m)
(mm)
8 3.5
7.5
10
•
Maximum Supply Hose Length 10 metres.
•
For DAVK-0001E and DMAK-0021E, if the warning whistle sounds at any time during the operation of the
auxiliary tool or spraygun, increase the input pressure until it stops. This ensures that there is sufficient
air reaching the headpiece and that your safety is maintained.
TECHNICAL INFORMATION
Certification / Approval
Standard / Compliance
Nominal Protection Factors
Visor: Chemical resistant
Impact resistant
Manufacturer's Minimum Design Flow Rate
Maximum Flow Rate
Operating Pressure
Maximum Operating Temperature
Carbon Cartridge
PROTECTION FACTORS
An assigned Protection Factor (APF) of 40 means that the respirator can be used in areas of contamination up to 40 X the Workplace Exposure Limit.
In other geographical areas, please refer to national or regional regulations or guidelines which modify the value of the protection factor
that you are allowed to use when selecting respiratory protection.
AIRVISOR RESPIRATOR SYSTEMS
Article No. Part No.
1013932 DAVK-0001E
1013934 DAVK-0003E
1013935 DAVK-0004E
1013938 DMAK-0021E
1013939 DMAK-0023E
1013980 DMAK-0024E
1013983 DAWK-4001E
1013987 DAWK-4011E
1765058 DAVK-0001E-DAC
1765059 DAVK-0003E-DAC
1765060 DAVK-0004E-DAC
1765061 DMAK-0021E-DAC
1765062 DMAK-0023E-DAC
1765063 DMAK-0024E-DAC
1765064 DAWK-4001E-DAC
1765065 DAWK-4011E-DAC
Supply Pressure in bars (psi)
DAVK-0001E DAVK-0003E, 0004E
DMAK-0021E DMAK-0023E, 0024E
DAWK-4001E, 4011E
5.3 bars
(77 psi)
5.4 bars
(79 psi)
5.5 bars
(80 psi)
CE Approved (CE 0194)
EN14594:2005 (Light Duty Class A)
Class 3 = 200
Class 4 = 2,000 DAVK & DMAK Models
EN 166.2.F
EN 166.2.B.9
260 l/min
290 l/min
4.5 bars (61 psi) to 7.0 bars (102 psi)
35°C
Replace after 1,000 hours, or
If odour is detected inside headpiece
Description
Airvisor 2 Paint Spraying Kit
Airvisor 2 Chemical Kit
Airvisor 2 Industrial Kit
Airvisor 2 MV Paint Spraying Kit
Airvisor 2 MV Chemical Kit
Airvisor 2 MV Industrial Kit
Airvisor 2 FV-Series Welding Kit
Airvisor 2 W-Series Welding Kit
Airvisor 2 Paint Spraying Kit double action connector
Airvisor 2 Chemical Kit double action connector
Airvisor 2 Industrial Kit double action connector
Airvisor 2 MV Paint Spraying Kit double action connector
Airvisor 2 MV Chemical Kit double action connector
Airvisor 2 MV Industrial Kit double action connector
Airvisor 2 FV-Series Welding Kit double action connector
Airvisor 2 W-Series Welding Kit double action connector
4.5 bars (61 psi)
4.6 bars (63 psi)
4.7 bars (64 psi)
DAWK models
EN-3