In Your Microwave Oven; Otien; Oven; The Light Bulb - Whirlpool MW8400XR Use & Care Manual

Building in your microwave oven
Your microwave oven is not limited to carts, counters or tables. Custom installations are made
easy with kits available from your dealer.
1.
Build the microwave oven into a cabinet or
wall by itself or over built-in single ovens in the
Whirlpool RDE, REE, RGE. RB and SB model series or
Imperial 7200 single gas ovens.
2. Attach the microwave oven to a wall by itself
or with cabinets over It.
3. Put the microwave oven on the MICRO SHELF'
Hood over a cooktop. The hood is available
ducted or as a recirculating hood, and includes
cooktop lights.
Ask Your dealer for details on...
l
832987 - 30-inch Built-in Kit
l
832989 -24-inch Built-in Kit
l
832991- 27-inch Built-in Kit
l
832993 -Wall Mounting Kit
. RH3330XR - MICRO SHELF @ Hood
Use only approved installation kits.
Obtain these kits from your authorized
Whirlpool dealer.
Caring for your microwave oven
Cleaning the microwave oven
Wipe often with warm sudsy
water and a soft cloth or
sponge
Caution:
For stubborn solI, boll a cup
of water In the oven for 2 or 3
minutes. Steam WIII soften
the
soil
Be sure to cle5 the areas
where the door and oven
frame touch when closed.
When cleaning surfaces of
door and oven that come to-
gether on closing the door,
use only mild, non-abrasive
soaps or detergents applied
with a sponge or soft cloth.
Rinse well.
Abrasive cleansers, steel wool pads, gritty wash cloths, etc., can damage the control
panel, electronics, and the interior and ederior oven surfaces. Use a soft cloth or a
sponge with a mild detergent or spray
glaSS
cleaner.
Replacing the light bulb
The microwave oven light should come on whenever the door is opened or the oven is operating
To replace:
1.
Unplug, or turn off at fuse box or circuit
breaker.
2.
Open the oven door.
3. Remove the 3 screws from the front of the
stirrer cover.
4. Pull down the front portion of the cover.
(It is creased across its width to form a hinge.)
5. Replace bulb with a 25watt candelabra
base bulb (FSP 313760). Obtain bulb from
Your authorized Whirlpool dealer.
6.
Close the cover and replace the screws.
7. Plug in, or turn on the main power supply.