Shelti 333 Morton Street Bay City, MI 48706 989-893-1739 Phone 989-893-1809 Fax Bayside Dollar Bill Acceptor Pool Table Manual & Instructions Contents Section-1 Introduction Bayside DBA Pool Table Features Part Numbers / Descriptions Section-2 Battery Installation & Connection Programming Buttons...
DBA / Roll Down Quarter Mechanism / Mechanical Coin Mechanism Mechanical Coin Mechanism Operation PC Board Battery Back-up To Save Program Settings If Not Connected to The 12-volt Battery *Display dependent. Section-1: Shelti Bayside DBA Pool Table Part Numbers / Descriptions Component Description...
Section-2: Programming Buttons The Bayside DBA pool table can be programed by the 3 vend buttons. The PLAY button is used to go up through menu options, and when data is flashing, pressing this will increment that data. The TIME button is the ENTER button and is used to go into the selected menu option, and ultimately initiate data edit.
Page 5
402-0021-0 Loop End Lanyard Cable 205-0086-0 Set Screw Shaft Collar 201-0044-0 Plastic Round Spacer 402-0013-0 Motor Crank Arm Only 402-0004-0 Motor 402-0007-0 Free Play Key Switch, Lock & Harness 402-0012-1 MEI-S6 Dollar Bill Acceptor- Up Stacker 402-0005-0 Set Buttons W/Switch & Harness SP-DBX-0-00-01 Complete Door Assemble –...
Section-3: Programming the PC Board Pressing the Program button for 2 seconds will allow you to enter the “Program Mode” displayed on the LCD display. Pressing any button once will go into the first menu option, “Change Settings”. For example, at “Change Settings”...
Section-3: Implementing Happy Hour “Zones / Time Periods” Happy hour pricing, bonus and credit settings are completely independent to the standard price and unique to each of the three zones. A zone is a specific Happy Hour time period. This means that the operator is able to discount or increase the pricing for Standard Games and or Timed Games for three different unique time periods or zones during the week.
Need help?
Do you have a question about the Bayside Dollar Bill Acceptor Pool Table and is the answer not in the manual?
Questions and answers