Tipro FREE+ 15 Getting Started

Getting started
with
15,0" FREE+
open open open
remove the remove the remove the
the connection the connection the connection
cable cover cable cover cable cover
cover cover cover
audio
to PC
sec. keyboard
ext. Tipro module
touch screen
VGA
power supply
RS232
guide the cables through guide the cables through guide the cables through
the main cable channel the main cable channel the main cable channel
put back the cable cover put back the cable cover put back the cable cover
and fix the 6 screws and fix the 6 screws and fix the 6 screws
1 1
connect the power supply connect the power supply connect the power supply
then VGA, fasten then VGA, fasten then VGA, fasten
the 2 screws, the 2 screws, the 2 screws,
followed by the USB followed by the USB followed by the USB
connection to the PC connection to the PC connection to the PC
3 3
if the cables exit at if the cables exit at if the cables exit at
the back remove the the back remove the the back remove the
back part of the back part of the back part of the
cable cover cable cover cable cover
close the connection close the connection close the connection
version
cover and secure it by cover and secure it by cover and secure it by
pressing both snaps! pressing both snaps! pressing both snaps!
2 2
you can also you can also you can also
connect up to connect up to connect up to
2 other USB devices 2 other USB devices 2 other USB devices
and an external and an external and an external
Tipro module if Tipro module if Tipro module if
present present present
4 4
Before using Before using Before using
your FREE+, your FREE+, your FREE+,
set the set the set the
resolution of resolution of resolution of
your Video card your Video card your Video card
to 1024×768 to 1024×768 to 1024×768
and the refresh and the refresh and the refresh
rate to 60Hz! rate to 60Hz! rate to 60Hz!