Advertisement
Getting started
with
12,1" FREE+
open
the cover
cables goes first
through the hole
ext. Tipro module
other USB devices
OSD keys
to PC
VGA
power supply
USB
guide cables
through the channel
1 1
connect
the power supply
then VGA
...followed by the
connection to the PC
3 3
if the cables have to exit
at the back, not at the
bottom: clear the precut
opening
version
gently close the cover
2 2
and serial
cable...
standard IBM
PS/2 keyboard
and, if present,
an external Touch
module
4 4
before using
your FREE+,
set the
resolution of
your Video card
to 800×600
and the refresh
rate to 60Hz!
Advertisement
Table of Contents
Related Manuals for Tipro FREE+ 12.1"
Summary of Contents for Tipro FREE+ 12.1"
-
Page 1: Getting Started
Touch module if the cables have to exit at the back, not at the bottom: clear the precut ext. Tipro module opening other USB devices OSD keys to PC power supply version... - Page 2 Installing ChangeMe programming utility Installing ChangeMe programming utility OLLOWING STEPS ARE NOT NEEDED IF THE CONFIGURATION IS WITHOUT PROGRAMMABLE KEYBOARD insert THE KEYBOARD IS ALREADY PROGRAMMED Tipro CD follow the on-screen directions select ChangeMe installation from the pop-up menu and calibrate the...
Need help?
Do you have a question about the FREE+ 12.1" and is the answer not in the manual?
Questions and answers