Using The Smart Remote As A Manually-Controlled Optical Source - Fluke OptiFiber Smart Remote User Manual

OFSR-X OptiFiber Smart Remote Options
Users Manual
Using the Smart Remote as a
Manually-Controlled Optical Source
You can manually-control the smart remote as a source
for loss and power measurements with an OptiFiber
tester or any optical power meter.
INPUT
port
O F
PTI IBER
F1 F2 F3 F4 F5
SETUP SAVE
VIEW
FUNCTIONS RECORDS
FIBER
EXIT
INSPECTOR
HELP ENTER
TEST
18
Figure 7. Using the Smart Remote as an Optical Source
To turn on the source, use the button on the fiber
module as described in Figure 7.
•
Hold for 3 seconds (red LED)
DTX-MFM: 850 nm
DTX-SFM: 1310 nm
•
Press again (green LED):
DTX-MFM: 850 nm
DTX-SFM: 1550 nm
•
Press again: OFF
(blinking green LED)
OUTPUT
port
PASS
TEST
FAIL
TALK
TONE
LOW BATTERY
TEST
TALK
awl08f.eps