Bissell ADAPT ION User Manual page 12

Maintaining the Brush Roll
WARNING
To reduce the risk of fi re, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
1 2
Make sure the vacuum is
If the Brush Roll stops OFF. Press the vacuum
spinning due to debris, foot Release Button to
the LED light will turn disconnect it from the
solid red. vacuum.
4
Slide the tab down to un-lock and lift
the corner cover piece.
6
Remove hair wrap
from Brush Roll,
Brush Roll Cap and
end of Brush Roll.
NOTE: Make sure the Brush Roll Cover Tab is locked into place to prevent damage to the
Brush Roll.
12
www.BISSELL.ca
3
Turn the foot over and
find the Brush Roll Cover
Tab. Use a coin to remove
the Brush Roll, turning
counter-clockwise to
unlock.
5
Grasp the Brush Roll and remove from
the foot window area. Clean off hair or
debris from brush.
7
Once Brush Roll is clean of debris and
wrapped hair, place back into the foot and
use coin to turn lock clockwise to lock into
position. Turn vacuum ON to reset.