Acoustic Guitar Simulator Pedal
Main Features
Ÿ 3 Working Modes: Piezo/Standard/Jumbo
Ÿ Full metal shell
Ÿ Very small and exquisite
Ÿ True bypass
Ÿ DC 9V Adapter power supply
Piezo:
Simulates the sound from a piezo pickup installed on an
electric-acoustic guitar.
Standard: Simulates a normal acoustic guitar sound.
Jumbo:
Simulates a bigger body acoustic guitar with more low end
and resonance.
3
6
7
8
9
4
5
6. Mode Switch:
Switch between Standard mode, Jumbo mode and
Piezo mode.
7. LEVEL Knob: Adjust the output volume.
8. BODY Knob: Adjust the resonance of guitar body.
9. TOP Knob:
Adjust the overall brilliance and harmonics.
Working Mode: 3 (Piezo/Standard/Jumbo)
Input: 1/4" monaural jack (impedance: 1M
Output: 1/4" monaural jack (impedance: 1k Ohms)
Power Requirements: AC adapter 9V DC (center minus plug)
Current Draw: 17 mA
Dimensions: 93.5mm (D) × 42mm (W) × 52mm (H)
Weight:160g
Accessories: Owner's Manual
*
Disclaimer: Any specification's update won't be amended in this manual.
1. TRUE BYPASS
Footswitch:
Push down the footswitch
to switch between effects
and bypass status.
2. ON/OFF LED:
Instructs effects or bypass
status of Acoustikar, when
the LED is lit up, the effects
is on.
3. DC IN Power Jack:
For power supply, use a 9-volt
DC regulated AC adapter(plug
polarity is positive on the barrel
and negative in the center).
4. INPUT Jack:
1/4" mono audio jack, for
connecting guitar.
5. OUTPUT Jack:
1/4" mono audio jack, outputs
the signal.
Ohms
)