Installation; Lnstructlons - Whirlpool MT2081XB Use And Care Manual

Installation Instructions
Before you begin operating the oven, carefulfy read the folbwing instructions.
1. Empty the microwave oven and clean
inside it with a soft, damp cbth. Check
for damage such as misaligned door,
damage around the door, or dents inside
the oven or on the exterior. If there is any
damage, do not operate the unit until it
has been checked by an authorized
Whir@ml service technician and any
repairs made.
2. Put the oven on a cart, counter, table, or
shelfthatisstrongenoughtoholdthe
oven and the food and utensils you put in
it. (lhs control side of the unit is the
heavy side. Use can when handling.)
The weight of Model
MT2081 XB is
approximately 31 bs (14 kg). The weight
of Model MT41 11 XB is appmxirnatefy 34
lbs (15.3 kg). The microwave oven should
be at a terrperature above 50°F (10°C)
for proper operation.
Exhawtvents
(on bottom in front)
wlnw
vent8
(on
side)
NOTE: Do not block the exhaust vents or
rear air intake openings. Allow a few inches
of space at back of oven where intake
openings are bcated. Bbcking the air intake
openings and exhaust vents can cause
damage to the oven and poor cooking
results. Make sure the microwave oven legs
are in pke to ensure proper airfbw.
Fin Hazard
Donotinstalltheovennexttoorovera
' heat source (for example, a cooktop or
range). Also, do not install oven in any
area where excessive heat and steam
are generated.
Failure to folbw the above could resuft
, in fire, electrical shock, excessive expo-
sure to microwave energy, or other
personal injury.