Replacing Filter Plates; Fitting E 499 For Suction And Rinsing Cannulae - Miele A 105 Operating Instructions Manual

Replacing filter
plates
 Filter plates must be replaced approx. every 2 weeks or after 20
cycles have been run.
Completely unscrew holder AUF 1.

Dismantle the holder and dispose of the filter plate.

Rinse the bottom part of the holder thoroughly before inserting a

new filter plate.
Screw the top and bottom parts of the holder back together and fit

the holder back onto the injector manifold.

Fitting E 499 for suction and rinsing cannulae

The E 499 is for reprocessing rinsing and suction cannulae, including
suction breakers. It comes with its own instructions.
en - Areas of application
43