Switching The Machine On And Off - Miele G 7764 SUPER-COMBI Operating Instructions Manual

Switching the machine on and off

Switching the machine on and off
°C
•
min
•
•
DOS
•
1. Switching on
Press I-0.
2. Selecting a programme
After switching on the dishwasher the
indicator lights next to the selectors will
light up to show the selection available.
Press the programme selector for
the required programme. The wash
temperature of the programme se-
lected will show up in the display
field.
Select additional programme c
"DRYING" if required (see "Selecting
an additional programme").
Press the h Start touchpad. The dis-
play field will now show the running
time in minutes for the programme
selected.
During the heat-up stage in "Wash-
ing" and "Final rinse" the end tem-
perature will be displayed.
All other programmes are automati-
cally blocked and only the lights for
the programme selected stay on.
22
• • •
I-O
• •
•
•
Programme Changes
A wrongly selected programme may be
changed as follows, if the "Start" touch-
pad has not yet been pressed:
Select the required programme.
Press the "Start" h button.
(otherwise "Interrupt programme"
see next page).
3. Selecting an additional
programme
The following additional programmes
are available:
c DRYING
This may be selected immediately
after choosing a wash programme
(exception "SUPER-SHORT" J). The
heater element switches on intermit-
tently for the drying process for 10
minutes. The total running time of the
programme will be lengthened ac-
cordingly.
k "REACTIVATION"
(see "Reactivating water softener").
q DRAIN
if, for example, the programme has
been interrupted.
To do this:
– Press the I-0 button.
– Press the q touchpad.
– Press the "Start" h touchpad.
•
•
•
•
•
•
•
•