Help And Support - Philips HTL2153B Manual

English
Important
Read and understand all instructions before you use your product. If
damage is caused by failure to follow instructions, the warranty does
not apply.

Help and support

For extensive online support, visit www.philips.com/support to:
• download the user manual and the quick start guide
• watch video tutorials (available only for selected models)
find answers to frequently answered questions (FAQs)
•
• email us a question
• chat with our support representative.
Follow the instructions on the website to select your language, and then
enter your product model number.
Alternatively, you can contact Consumer Care in your country. Before
you contact, note down the model number and serial number of your
product. You can find this information on the back or bottom of your
product.
4
Safety
Risk of electric shock or fire!
• Never expose the product and accessories to rain or water. Never
place liquid containers, such as vases, near the product. If liquids are
spilt on or into the product, disconnect it from the power outlet
immediately. Contact Consumer Care to have the product checked
before use.
Never place the product and accessories near naked flames or
•
other heat sources, including direct sunlight.
• Never insert objects into the ventilation slots or other openings on
the product.
Where the mains plug or an appliance coupler is used as the
•
disconnect device, the disconnect device shall remain readily
operable.
Disconnect the product from the power outlet before lightning
•
storms.
• When you disconnect the power cord, always pull the plug, never
the cable.
Risk of short circuit or fire!
• Before you connect the product to the power outlet, ensure
that the power voltage matches the value printed on the back or
bottom of the product. Never connect the product to the power
outlet if the voltage is different.
Risk of injury or damage to this product!
• Never place the product or any objects on power cords or on
other electrical equipment.
If the product is transported in temperatures below 5°C, unpack
•
the product and wait until its temperature matches room
temperature before connecting it to the power outlet.