Burner Control Knobs; Using The Cooktop; Before Using The Cooktop For The First Time - Bosch NGP Use And Care Manual

Ngt series; ngp series
Hide thumbs Also See for NGP:
Table of Contents

Advertisement

Available languages

Available languages

Burner Control Knobs

Using the Cooktop

Before Using the Cooktop
for the First Time
WARNING:
tioned on the cooktop whenever the cooktop is in use. Each of the four
feet must be placed into the corresponding dimples in the cooktop. Do
not use a grate if the rubber feet are missing or damaged.
The standard burner controls have an infinite number of heat settings with no
fixed positions.
Figure 4 - Burner Control Knob
To operate: Select the appropriate control knob, push down and turn counter-
clockwise to the desired flame size. Turn OFF by turning the control knob clock-
wise to OFF.
A rubber grommet is located under each control knob.
To remove knob and grommet: With burner in the OFF position, gently lift knob
up and off. Gently pull grommet toward center and lift out.
WARNING:
into rough-in box.
To replace grommet and knob: Replace grommet by placing center groove
around cooktop. The rubber grommet should be firmly attached around the cook-
top opening. Place the control knob indicator line at the OFF position; press down
firmly.
Remove all packing materials and literature from the cooktop surface.
While cool, wipe with a clean, damp sponge and dry.
There may be a slight odor during the first several uses; this is normal and will
disappear.
Optimum cooking results depend on the proper cookware being selected and
used. (See Proper Cookware.)
Read all safety precautions and Use and Care Manual information prior to
operating.
To prevent flare-ups all grates must be properly posi-
OFF
HI
LO
To avoid electric shock, do not reach through opening
English 5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents