Beurer BEURAB01 Quick Start Manual

Attaching the belt

Ensure that your skin is clean and free of creams or oils

Lay the belt down with the electrodes facing towards you

Moisten both electrodes and your stomach with water. Make sure the

electrode surfaces are evenly moistened to avoid high voltage points on your
skin during subsequent training
Place the belt around your waist so that the electrodes are positioned on your

stomach
Close the Velcro fastener ensuring good contact between the electrode and

skin, but it does not constrict you

Switching on the device

Press the On/Off switch

Note that Program A is activated the first time the device is started


Selecting the program

Start the first week's training with program A at a low level and gradually

raise the level of your training with increasing muscle strengthening
Select the program by yourself according to your well-being and fitness level


Setting the intensity level

Press the intensity selection key to increase the intensity and intensity

selection key to reduce the intensity
For more details on using the device, stopping or avoiding strong pulses, or taking a
break during the training session, please go through the user manual for Abdominal
Toning Belt by Beurer Germany, available for download below
Note: If the belt is pulled away from the stomach so the skin contact in the
electrode region is interrupted, the intensity level automatically returns to zero
Avoiding unwanted pulse changes
Switch on the key lock by pressing the program selection key for around 3

seconds
Note the symbol appearing on the display after a sound signal

Press the key lock once more to deactivate

QUICK START GUIDE
OR