Thank you for your purchase Thank you for your purchase! We are pleased that you have chosen Sears for your outdoor furniture purchase. We hope that you enjoy the unmatched quality, comfort, and style of your new patio set. Every piece is meticulously considered all the way down to the smallest details, exclusively for you, by our world class design team.
Safety Information Furniture Set Up Ensure that all parts are assembled properly and fully tightened as per the instructions. When placing in the desired location, ensure that all legs are resting on the same surface. You may adjust the legs levelers as required to ensure that the item stands in a rigid position.
Warranty Cushions are covered for a period of one (1) year against defects in material or workmanship. Frames are warranted to be free from defects in material or workmanship for a period of one (1) year. Exclusions: items used for commercial, contract, or other non- residential purposes, or items damaged due to acts of Nature, vandalism, misuse, or improper assembly is not covered.
Pre-Assembly PLANINNG ASSEMBLY To prevent damage, place all parts on a soft surface during assembly. Remove all protective caps before beginning assembly. It takes about 90 minutes for two person to complete all the assembly. WEIGHT LIMIT The recommended weight limit for the following products are listed below: Chair: 200 lbs Ottomans: 200 lbs Side Table: 50 lbs...
Pre-Assembly (continued) Package Contents PART QUANTITY DESCRIPTION BACKREST Safety Information 1. EVERY SCREW NEEDS TO BE USED WITH A WASHER. 2. DO NOT FULLY TIGHTEN SCREWS UNTIL INDICATED IN STEP 3.
Assembly Instruction Connecting the seat to the backrest CONNECT THE SEAT “B”TO THE BACKREST “A” USING SCREW-2 “BB” AND WASHER “DD”. LOOSELY TIGHTEN ALL SCREWS USING THE HEX WRENCH “EE”.
Page 8
Assembly Instruction (continued) Attaching the left arm to the backrest and the seat ATTACH THE LEFT ARM “C” TO THE BACKREST “A” USING SCREW-3 “CC” AND WASHER “DD”. ATTACH THE LEFT ARM “C” TO THE SEAT “B” USING SCREW-1 “AA”, SCREW “BB”-2 AND WASHER “DD”...
Page 9
Assembly Instruction (continued) Tightening all the screws ONCE ALL THE SCREWS ARE IN PLACE. FULLY TIGHTEN ALL SCREWS. AND TURN THE CHAIR RIGHT SIDE UP AND ENSURE THAT ALL CONNECTIONS ARE SECURED BEFORE USE. PLACE CUSHIONS ON CHAIR.
Page 10
Pre-Assembly Package Contents PART QUANTITY DESCRIPTION TABLE TOP TABLE LEG CENTRE RING Safety Information 1. EVERY SCREW NEEDS TO BE USED WITH A WASHER. 2. DO NOT FULLY TIGHTEN SCREWS UNTIL INDICATED IN STEP 2.
Page 11
Assembly Instruction Inserting the four legs to the table top and center ring INSERT THE FOUR TABLE LEGS “B” TO THE TABLE TOP “A”. ATTACH THE FOUR TABLE LEGS “B” TO THE CENTER RING “C” USING SCREW “AA” AND WASHER “BB”. LOOSELY TIGHTEN ALL SCREWS USING THE HEX WRENCH “CC”.
Page 12
Assembly Instruction (continued) Tightening all screws ONCE ALL SCREWS ARE IN PLACE FULLY TIGHTEN ALL THE SCREWS USING THE HEX WRENCH “CC”. TURN TABLE RIGHT SIDE UP AND ENSURE THAT ALL CONNECTIONS ARE SECURE BEFORE USE.
Customer Service YOTRIO CORPORATION 1100 Coiner Ct., City of Industry, CA 91748 1-626-269-6399 1-866-905-4107 SEVICE HOURS: MONDAY-FRIDAY 8:30 AM TO 5:00 PM PST / 11:30 AM TO 8:00PM EST E-MAIL: customerservice@yotrious.com...
Page 14
Email: customerservice@yotrious.com or Call toll-free: 1-866-905-4107 Made in CHINA / Hecho en CHINA...
Need help?
Do you have a question about the Nichols 06526058-0 and is the answer not in the manual?
Questions and answers