How To Use Your Easykey 1; Unlock From Outside; With Pin Code; With Fingerprint - Philips EasyKey 7300 User Manual

Lever smart door lock
Hide thumbs Also See for EasyKey 7300:
Table of Contents

Advertisement

5.How to use your EasyKey
Unlock | Unlock from outside
With User PIN code

With fingerprint

1
2
1
Touch
Enter a
keypad
Finger
PIN code
-print
3
Press the
handle
1
1
Place your registered
Touch the keypad to
finger properly on the sensor.
wake up the system.
2
Enter the registered
2
After hearing a voice
confirm
prompt of "Door opened",
user PIN code and
with [#].
press down the handle to
open the door.
3
After hearing a voice
prompt of "Door opened", press
down the handle to open the
door.
Unlock | Unlock from inside

With handle

Philips EasyKey employs indoor
fast opening motise allowing
you to directly press down the
handle to unlock.
Attention
When you want to open the door
from inside, please make sure the
safe handle switch is toggled to
green scale and the safe handle
function is disabled.
16

With card

1
Card
reader
2
2
Press the
Press the
handle
handle
1
Place your registered
card on the card reader.
2
After hearing a voice
prompt of "Door opened",
press the handle to open
the door.
Lock | Lock from outside/inside

Lock from outside

Lock from inside

The sensor bolt can detect
the signal when you close the
door, and the motor will drive
the main dead bolt to let it
automatically pop up and
lock the door.
Dead lock from inside
After the door is locked, long press the
[CLOSE] button until the button flashes in
red and there is a voice prompt of "Inside
deadlock enabled".
Attention
Under inside deadlock mode, all functions of the
outside escutcheon will be locked. If you try to
wake up the system manually, the keypad area will
display the combination of "15937(X)" and there
will be a voice prompt of "Inside deadlock enabled"
reminding you that the door has been dead locked
from inside.
Under deadlock mode, all operations on the
outside escutcheon are disabled. Master PIN code
verification or mechanical key opening is required
to unlock the door from deadlock mode.
The sensor bolt can detect the signal
when you close the door, and the motor
will drive the main dead bolt to let it
automatically pop up and lock the door.
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents