Starting The Programme; Cancelling The Programme - Beko DFN16X21B User Manual

2. Time Delay selection mode is
activated. 3-hours time delay icon will
flash on the display.
4. With a second press on the key,
3-hours time delay icon will disappear
and 6-hours time delay icon will start to
flash. With a third press, 6-hours time
delay icon will disappear and 9-hours
time delay icon will start to flash.
5. Press the Start/Pause key to activate
the time delay.
While the Time Delay is active the
relevant delay period and start icon will
be displayed steadily. For 0-3 hours
time delay the 3-hours time delay icon
will be displayed, for 3-6 hours time
delay the 6-hours time delay icon will
be displayed, and for 6-9 hours time
delay the 9-hours time delay icon will
be displayed.
If the door is opened while the Time
Delay is active, the countdown will be
paused and start icon will start to flash.
To exit time delay mode without
activating the Time Delay, press the
time delay key until the 3-6-9 hours
duration indicators disappear. Time
Delay mode will be cancelled and the
programme selection mode will be
activated.
Changing the settings while Time
Delay function is active
While the Time Delay function is activated,
you cannot make changes in the washing
programme, auxiliary functions or the
duration of delay time.
To cancel the Time Delay function
1. Press and hold Start/Pause/Cancel key
for 3 seconds. Time delay period and
start/pause icon will start to flash and
Time Delay function will be cancelled.
You can select and start a new
programme following the cancellation
of Time Delay function.
Time Delay function cannot be set after
the programme starts.

Starting the programme

To start your machine after selecting the
programme and auxiliary functions, press
Start/Pause/Cancel key.
Your machine performs water softening
depending on the hardness level of the
supply water. Due to water softening
process the programme duration may
change. The programme duration can
also change while the programme is
running depending on the ambient
temperature where your machine is
installed, temperature of the supply
water and amount of the dishes.
Pay attention not to open the door
of the machine when it is running.
Stop the machine by pressing Start/
Pause/Cancel key if you have to open
the door. Then, open the door of the
machine. There may be a rush of
vapour when you open the door of your
machine; be careful. Close the door of
your machine and press Start/Pause/
Cancel key again. Programme will
resume running.
The machine will remain silent in
pause mode for some time in order to
remove the water in the machine and
on the dishes completely and to have
the water softener cleaned, and then it
will resume running in drying mode.

Cancelling the programme

1. Press Start/Pause/Cancel key for 3
seconds to cancel the programme.
2. Release the key when the programme
indicator starts flashing. For a couple
of minutes the machine will fulfill the
necessary operations required to
cancel the programme.
33/EN