Parts And Features; Turntable; Microwave Oven Control; Display - Whirlpool MH1160XS Use & Care Manual

PARTS AND FEATURES

This manual may cover several different models. The model you
have purchased may have some or all of the features shown here.
The appearance of your particular model may differ slightly from
the illustrations in this manual.
A B
E F G
A. Vent grille
B. Model and serial number plate
C. Charcoal filter (behind vent grille)
D. Microwave oven light
E. Door lock system
F. Metal shielded window
G. Cooking guide label

Turntable

A
B
C
A. Turntable
B. Hub
C. Support
The turntable can rotate in either direction to help cook food
more evenly. Do not operate the microwave oven without having
the turntable in place. See "Assistance or Service" to reorder any
of the parts.
To Install:
1. Remove tape from the hub.
2. Place the support on the microwave oven cavity bottom.
3. Place the turntable on the support.
Fit the raised, curved lines in the center of the turntable
bottom between the three spokes of the hub. The rollers on
the support should fit inside the turntable bottom ridge.
C D
H I J K
H. Grease filters (shipped in
microwave oven cavity)
I. Cooktop light
J. Microwave inlet cover
K. Control panel
Parts and Features not shown
Turntable

MICROWAVE OVEN CONTROL

When power is first supplied to the microwave oven, a ":" will
blink in the display. Touch CANCEL OFF to stop the blinking.
If the ":" blinks in the display at any other time, a power failure
has occurred. Touch CANCEL OFF and reset the clock if needed.
If an invalid value has been entered, the invalid entry tones will
sound, and the input prompt will reappear in the display. Retry
your entry.
When the microwave oven is in use, the display shows cooking
power, quantities, weights and/or prompts. When the microwave
oven is not in use (standby mode), the display shows the time of
day or Timer countdown.
The speed of the scrolling text may be adjusted, if necessary.
To Adjust Scroll Speed:
1. Touch and hold CLOCK for 3 seconds until 2 tones sound.
2. Touch number pad "1" for SLOW, "2" for NORMAL or "3" for
FAST.
3. Touch START to complete the adjustment.

Display

5