Returning The Stored Electric Vehicle To Service - Husqvarna HUV4210 2005 Series Maintenance Service Manual

GENERAL INFORMATION
4. Adjust tires to recommended tire pressure. See Section 2 – Vehicle Specifications.
5. Perform semiannual periodic lubrication. See Periodic Lubrication Schedules, Section 10,
Page 10-4.
6. Thoroughly clean front body, rear body, seats, battery compartment, and underside of vehicle.
7. Do not engage the park brake. Chock the wheels to prevent the vehicle from rolling.
8. Keep batteries fully charged during storage.
NOTE: PowerDrive Battery Chargers: Leave PowerDrive battery chargers plugged in during storage.
The onboard computer will automatically activate the charger when necessary. If charger cannot
remain plugged in, or AC power will not be available during extended storage, disconnect the bat-
teries for storage. See WARNING "To avoid unintentionally starting..." in General Warning,
Section 1, Page 1-2.
CAUT ION
• Check the vehicle monthly to ensure the charger is operating correctly during storage.

RETURNING THE STORED ELECTRIC VEHICLE TO SERVICE

1. If necessary, connect batteries.
2. Fully charge batteries.
3. Adjust tire to recommended pressure. See Section 2 – Vehicle Specifications.
4. Perform the Pre-Operation and Daily Safety Checklist. See the vehicle owner's manual.
2005-2006 HUV4210-G, 4210-E, 4210-GXP, 4210-EXP Maintenance and Service Manual
Storage – Electric Vehicle
Page 3-5
3