Table of Contents
Advertisement
MICROWAVE OVEN
CONTROL
Display
When power is first supplied to the microwave oven, "PLEASE
SET TIME OF DAY" scrolls 3 times, and then a ":" will appear on
the display.
Any other time the above tex t scrolls, followed by a ":" on the
display, a power failure has occurred. Touch OFF/CANCEL and
reset the Clock if needed.
When the microwave oven is in use, the display shows cooking
power, quantities, weights and/or prompts.
If "RETRY" blinks on the display for one second, an invalid pad
was touched. Retry your entry.
When the microwave oven is not in use, the display shows the
time of day or Timer countdown.
Progress Bar
The progress bar is a visual picture of the estimated running time
of a cooking cycle. It will appear during COOK, JET DEFROST™
control, REHEAT and SENSOR ONE TOUCH control. The lines in
each of the segments will light from left to right as the time nears
the end. When all twelve lines (all three segments) are lit, the
cooking cycle is completed.
Number Codes
The microwave oven is preset with shortcut number codes. A
number code includes one or more of the following: cooking
power, cook time and food quantity or weight. See the code
charts in the "Cooking" and "Reheating" sections for additional
information.
Start/Enter
The START/ENTER pad begins any function. If not touched within
5 seconds after touching a pad, "START?" will appear on the
display as a reminder. If not touched within 5 minutes after
touching a pad, the display will return to the time of day mode
and the programmed function will be cancelled.
If cooking is interrupted, touching START/ENTER will resume the
preset cycle.
Off/Cancel
The OFF/CANCEL pad stops most functions ex cept for the Timer,
Control Lock and Demo Learning Mode.
The microwave oven will also turn off when the door is opened.
Close the door and touch START/ENTER to resume the cycle.
JET START™ Feature
Touch JET START control to automatically start the microwave
oven for a thirty-second cook time at 100% cooking power.
While the oven is operating, touch JET START control to add
thirty seconds of cook time at the set cooking power.
After a cycle ends, touch JET START control to add thirty
seconds of cook time at 100% cooking power.
Multiple thirty-second increments can be added any time by
repeatedly touching JET START control.
7
Hide quick links:
Advertisement
Table of Contents
