Connections
Connect the AC adaptor (A), USB cables (B), and LAN cable (C) as shown
below.
Note:
R The AC adaptor must be connected to the cradle in order to use the LAN port
and USB ports.
R Connectivity features may vary depending on the unit model. For the latest
information, refer to the latest Operating Instructions on the following web site.
http://pc-dl.panasonic.co.jp/itn/manual/menu_en.html
Docking and removing the unit
Dock the unit as shown below. Make sure the unit is inserted fully into the cradle.
When the unit is docked, you can confirm the charging status by observing the
unit's indicator (A).
To remove the unit, press the release button firmly and then lift the unit up.
Note:
R The AC adaptor must be connected to the cradle in order to charge the unit.
R Do not remove the unit while data is being transmitted by the USB or LAN ports.
A
C
B
B
A
9